First Term Examination Questions Technical Drawing SS 1 First Term Lesson

Week 12: Examination of the Topics Covered in the First Term

Exam Instructions for Teachers:

Ensure a quiet environment: All students should be seated properly and there should be no disturbances during the exam.
Avoid cheating: Monitor all students closely to prevent cheating or any form of malpractice. No sharing of materials or looking at others’ work is allowed.
Provide clear instructions: Read out the instructions carefully before the exam begins.
Time management: Ensure the exam is conducted within the allocated time, keeping track of the duration for each section.
Supervise properly: Walk around the room to ensure all students are following the exam rules.
No talking: Students should refrain from speaking once the exam begins. If clarification is needed, it should be done quietly.
Collect materials after the exam: Ensure all exam papers are collected at the end of the exam session.
Help with technology (if required): If the exam requires any use of tools or devices, assist students before the exam starts.

Exam Instructions for Students:

Read the instructions carefully: Understand the format of the exam before starting.
Do not cheat: Do your best work on your own. Help from others or copying is not allowed.
Write legibly: Your answers should be clear and easy to read.
Stay focused: Pay attention to each question and stay calm during the exam.
Answer every question: Try to answer all questions, even if you’re not sure. It’s okay to skip and come back later.
Check your work: Review your answers before submitting your paper.
Respect the rules: Do not talk to others during the exam. Keep your materials on your desk only.
Follow the time limit: Keep an eye on the clock and ensure you finish within the allowed time.

Part A: Objective Questions

(30 fill-in-the-blank questions with options a, b, c, or d)

______ is the process of creating precise drawings of objects.
a) Painting
b) Sculpting
c) Technical Drawing
d) Writing
A ______ is a tool used to draw perfect circles.
a) Protractor
b) Compass
c) Ruler
d) Set Square
The ______ is the distance from the center of a circle to any point on its edge.
a) Diameter
b) Radius
c) Circumference
d) Sector
The total number of sides in a quadrilateral is ______.
a) Three
b) Four
c) Five
d) Six
A ______ is a four-sided shape with equal sides and four right angles.
a) Triangle
b) Circle
c) Square
d) Rectangle
A ______ is used to measure angles.
a) Set square
b) Ruler
c) Protractor
d) Compass
A ______ is a line that divides something into two equal parts.
a) Bisector
b) Trisection
c) Diameter
d) Radius
______ lines are used to show parts that are hidden from view.
a) Visible
b) Hidden
c) Border
d) Dimension
In technical drawing, the ______ line shows the edge of the object.
a) Center
b) Dimension
c) Visible
d) Construction
The ______ is used to define the boundary of the drawing area.
a) Borderline
b) Centerline
c) Dimension line
d) Construction line
A ______ triangle has all three sides equal.
a) Right-angled
b) Scalene
c) Isosceles
d) Equilateral
The ______ angle measures exactly 90°.
a) Acute
b) Obtuse
c) Right
d) Reflex
A ______ is used to draw straight lines in specific angles.
a) Set square
b) Compass
c) Ruler
d) Protractor
The ______ is the longest side of a right-angled triangle.
a) Hypotenuse
b) Base
c) Height
d) Side
A ______ is a shape with four right angles but unequal sides.
a) Rectangle
b) Square
c) Parallelogram
d) Trapezium
A ______ is used to divide a circle into equal sections.
a) Protractor
b) Set square
c) Divider
d) Compass
The angle formed by two perpendicular lines is called a ______ angle.
a) Acute
b) Right
c) Obtuse
d) Reflex
A ______ is a three-sided polygon.
a) Square
b) Triangle
c) Rectangle
d) Parallelogram
A ______ is a line that divides a figure into two equal parts.
a) Radius
b) Centerline
c) Bisector
d) Diameter
The ______ is the distance around the edge of a circle.
a) Radius
b) Diameter
c) Circumference
d) Sector
A ______ is a shape with four sides and two pairs of parallel sides.
a) Square
b) Rectangle
c) Rhombus
d) Trapezium
______ lines are used to show the center of an object.
a) Dimension
b) Center
c) Hidden
d) Border
______ is used to measure the length of sides and angles in a drawing.
a) Ruler
b) Compass
c) Divider
d) Protractor
A ______ is used to create straight lines in any direction.
a) Ruler
b) Compass
c) Protractor
d) Set square
The ______ of a triangle is the distance between the base and the top vertex.
a) Height
b) Base
c) Side
d) Angle
The ______ is the smallest angle in a triangle.
a) Right angle
b) Acute angle
c) Obtuse angle
d) Reflex angle
A ______ is a polygon with four sides.
a) Triangle
b) Square
c) Parallelogram
d) Quadrilateral
The angle between two parallel lines is ______ degrees.
a) 0°
b) 45°
c) 90°
d) 180°
A ______ is a three-sided polygon with no sides equal.
a) Scalene triangle
b) Equilateral triangle
c) Isosceles triangle
d) Right-angled triangle
A ______ line is used to connect two points on a drawing.
a) Center
b) Dimension
c) Construction
d) Visible

Part B: Theory Questions

(30 short answer questions)

What is the role of a drawing board in technical drawing?
How do you draw a perfect circle using a compass?
What is the difference between a right angle and an acute angle?
Describe the function of a title block in technical drawing.
What is the importance of using set squares in technical drawing?
What are the steps involved in dividing a line into three equal parts?
Explain what a bisector is in geometry.
What is the significance of borderlines in technical drawings?
How do you construct a triangle with given three side lengths?
How would you draw a parallel line to a given line?
What is the definition of a quadrilateral?
How do you divide a circle into equal sections?
What are the different types of triangles you can draw in technical drawing?
How can you calculate the perimeter of a rectangle?
Explain how you can construct a right-angle triangle.
What are hidden lines used for in technical drawing?
What does the radius of a circle represent?
What is the importance of neatness in technical drawing?
What are the different properties of a square?
How do you draw a perpendicular line to another line?
What is the role of a protractor in technical drawing?
How do you measure angles accurately using a protractor?
Explain how you can construct an equilateral triangle.
What are the main parts of a triangle?
What is the purpose of using a compass in technical drawing?
How do you write numbers and letters neatly in technical drawing?
What is the difference between a square and a rectangle?
Explain the purpose of centerlines in technical drawing.
How can you identify a scalene triangle?
What is the importance of understanding angles in technical drawing?

Part C: True or False Questions

(30 True or False questions)

A right angle measures 90°. (True / False)
The diameter is half the length of the radius. (True / False)
A parallelogram has four equal sides. (True / False)
Set squares are used to draw angles of 30°, 45°, and 60°. (True / False)
A rectangle has four sides of equal length. (True / False)
A circle has three parts: the radius, diameter, and circumference. (True / False)
Hidden lines are used to show visible parts of an object. (True / False)
A triangle has five sides. (True / False)
A square has four equal sides and four right angles. (True / False)
A triangle can have one right angle. (True / False)
The circumference of a circle is the length of its radius. (True / False)
All quadrilaterals have four equal sides. (True / False)
A protractor measures angles. (True / False)
A scalene triangle has all sides equal. (True / False)
The perimeter of a square is four times the length of one side. (True / False)
A compass is used to draw circles and arcs. (True / False)
You can divide a circle into equal parts using a divider. (True / False)
The sum of the angles in any triangle is 180°. (True / False)
The radius is twice the length of the diameter. (True / False)
A parallelogram is a type of quadrilateral. (True / False)
Angles can be measured in degrees. (True / False)
A rectangle always has four right angles. (True / False)
The intersection of two lines forms an angle. (True / False)
You can use a ruler to measure angles. (True / False)
The sides of a rhombus are equal in length. (True / False)
A circle can have only one radius. (True / False)
A triangle can have at least two equal sides. (True / False)
A square has opposite sides parallel. (True / False)
A right triangle has one angle greater than 90°. (True / False)
A protractor measures distances. (True / False)

Part D: Fill in the Gaps Questions

(30 fill-in-the-blank questions without options)

A triangle with all equal sides is called an ______ triangle.
The distance from the center of a circle to the edge is called the ______.
A ______ triangle has exactly one right angle.
The sum of the angles in any triangle is ______ degrees.
A ______ is used to draw straight lines in specific angles.
A ______ is a four-sided shape with opposite sides equal and parallel.
A ______ is a tool used to measure angles.
The ______ line divides an angle into two equal parts.
The center of a circle is the point from which the ______ is measured.
A ______ is a shape with four sides and four right angles.
The ______ angle is exactly 90 degrees.
A ______ is a straight line that divides an object into two equal parts.
The ______ is the longest side of a right-angled triangle.
A ______ is used to measure distances between two points.
A square has four ______ sides.
A ______ is a polygon with three sides.
A ______ line is used to indicate the center of symmetry.
The ______ is used to divide a circle into equal parts.
A ______ is a shape with four sides and only one pair of parallel sides.
A ______ line is used to show parts of a drawing that are hidden from view.
A ______ triangle has no equal sides.
A ______ is the perimeter of a square.
A ______ is used to construct perfect circles.
A ______ is a four-sided shape with opposite sides parallel.
A ______ line is used to divide a figure into equal parts.
A ______ angle is less than 90 degrees.
A ______ is used to draw arcs or circles.
A ______ is the part of the circle that connects two points on its circumference.
A ______ triangle has at least two equal sides.
A ______ angle measures more than 90 degrees.

This structure ensures students review all topics covered throughout the term, while the clear instructions help prevent any confusion or exam malpractices.

Part A: Objective Questions (30 Fill-in-the-Blank with Options)

A triangle with three equal sides is called a(n) ____________.
(a) scalene (b) equilateral (c) right (d) isosceles
Answer: (b) equilateral
The sum of the angles in a triangle is always __________ degrees.
(a) 180 (b) 360 (c) 90 (d) 270
Answer: (a) 180
A right angle measures __________ degrees.
(a) 45 (b) 90 (c) 60 (d) 180
Answer: (b) 90
A circle is drawn using a __________.
(a) ruler (b) compass (c) protractor (d) set square
Answer: (b) compass
A parallelogram has __________ pairs of parallel sides.
(a) 1 (b) 2 (c) 3 (d) 4
Answer: (b) 2
An acute angle is __________ degrees.
(a) less than 90 (b) exactly 90 (c) greater than 90 (d) 180
Answer: (a) less than 90
The sum of the angles in a quadrilateral is __________ degrees.
(a) 180 (b) 360 (c) 270 (d) 90
Answer: (b) 360
A trapezoid has __________ pairs of parallel sides.
(a) 1 (b) 2 (c) 3 (d) 4
Answer: (a) 1
A triangle with one angle of 90° is called a(n) __________ triangle.
(a) scalene (b) equilateral (c) right (d) obtuse
Answer: (c) right
A square has __________ sides of equal length.
(a) 3 (b) 4 (c) 5 (d) 6
Answer: (b) 4
The longest side of a right triangle is the __________.
(a) hypotenuse (b) base (c) opposite (d) adjacent
Answer: (a) hypotenuse
A rhombus has __________ equal sides.
(a) 2 (b) 3 (c) 4 (d) 5
Answer: (c) 4
An obtuse angle is __________ degrees.
(a) greater than 90 (b) less than 90 (c) exactly 90 (d) 180
Answer: (a) greater than 90
The tool used to measure angles is a __________.
(a) ruler (b) compass (c) set square (d) protractor
Answer: (d) protractor
A parallelogram has opposite __________ that are equal.
(a) sides (b) angles (c) lines (d) points
Answer: (a) sides
The sum of the interior angles of a triangle is __________ degrees.
(a) 90 (b) 360 (c) 180 (d) 270
Answer: (c) 180
A right angle is always __________ degrees.
(a) 45 (b) 90 (c) 60 (d) 180
Answer: (b) 90
A scalene triangle has __________ equal sides.
(a) one (b) two (c) three (d) none
Answer: (d) none
A triangle with all angles less than 90° is called a(n) __________ triangle.
(a) obtuse (b) acute (c) right (d) scalene
Answer: (b) acute
A rhombus has opposite __________ that are equal.
(a) angles (b) sides (c) lines (d) shapes
Answer: (a) angles
A quadrilateral has __________ sides.
(a) 3 (b) 4 (c) 5 (d) 6
Answer: (b) 4
A __________ has four right angles and opposite sides equal.
(a) square (b) parallelogram (c) rectangle (d) rhombus
Answer: (c) rectangle
A rectangle has opposite sides that are __________.
(a) unequal (b) parallel (c) perpendicular (d) curved
Answer: (b) parallel
The point where two lines meet to form an angle is called a __________.
(a) vertex (b) point (c) angle (d) line
Answer: (a) vertex
An equilateral triangle has __________ equal sides.
(a) two (b) three (c) four (d) none
Answer: (b) three
The tool used to draw straight lines is a __________.
(a) ruler (b) compass (c) protractor (d) set square
Answer: (a) ruler
The opposite sides of a rectangle are always __________.
(a) equal (b) unequal (c) parallel (d) perpendicular
Answer: (a) equal
A __________ triangle has two equal sides.
(a) scalene (b) isosceles (c) equilateral (d) right
Answer: (b) isosceles
The distance around a circle is called the __________.
(a) area (b) circumference (c) radius (d) diameter
Answer: (b) circumference
An isosceles triangle has __________ equal sides.
(a) none (b) one (c) two (d) three
Answer: (c) two

Part B: Theory Questions (30 Short Answer Questions)

What is a triangle?
How many angles are there in a quadrilateral?
What is the difference between a square and a rectangle?
How do you draw a right angle?
What is the sum of the angles in any triangle?
How do you identify an obtuse angle?
What is the difference between an acute angle and an obtuse angle?
How many sides does a rhombus have?
Define a parallelogram.
What does the hypotenuse refer to in a right triangle?
How do you measure angles?
What makes a triangle equilateral?
How can you draw a circle with a compass?
What is a right triangle?
Describe an isosceles triangle.
What is the formula for the area of a rectangle?
How do you identify a parallelogram?
What is the difference between a square and a rhombus?
What is the sum of the angles in a quadrilateral?
Describe a trapezoid.
What is the purpose of a protractor in technical drawing?
How do you find the area of a triangle?
What does the term “vertex” mean in geometry?
How can you classify triangles by angles?
How do you construct an equilateral triangle?
What does “opposite sides parallel” mean in geometry?
How do you bisect a line?
What is the relationship between a rectangle and a square?
What are the properties of a rhombus?
How do you construct a right angle using a set square?

Part C: True or False Questions (30 Statements)

A square has four right angles. (True/False)
A circle has 4 sides. (True/False)
A rhombus has opposite angles equal. (True/False)
A triangle has 5 sides. (True/False)
The sum of the angles in a triangle is always 360°. (True/False)
A rectangle has two pairs of equal opposite sides. (True/False)
A scalene triangle has no equal sides. (True/False)
The diameter of a circle is the longest distance across the circle. (True/False)
A parallelogram has one pair of equal opposite sides. (True/False)
A right triangle has one angle of 90°. (True/False)
A trapezoid has two pairs of parallel sides. (True/False)
A scalene triangle has all sides of equal length. (True/False)
A square is a type of rectangle. (True/False)
A triangle with all angles less than 90° is called an obtuse triangle. (True/False)
A rectangle always has four equal sides. (True/False)
The sum of the angles in any quadrilateral is 180°. (True/False)
An equilateral triangle has all sides equal. (True/False)
A right angle measures exactly 45°. (True/False)
A triangle can have exactly two equal sides. (True/False)
The opposite sides of a square are always parallel. (True/False)
A circle has one side. (True/False)
A scalene triangle can have two equal angles. (True/False)
A protractor measures distances. (True/False)
The sum of the angles in a quadrilateral is 180°. (True/False)
A rhombus has equal angles. (True/False)
A parallelogram has two right angles. (True/False)
A circle’s radius is half the length of its diameter. (True/False)
A hexagon has six sides. (True/False)
A triangle cannot have more than one right angle. (True/False)
A parallelogram has four right angles. (True/False)

Part D: Fill-in-the-Gaps Questions (30 Fill-in-the-Blank)

The longest side of a right triangle is called the __________.
A rectangle has __________ right angles.
The sum of the interior angles of a quadrilateral is __________ degrees.
A triangle with all equal sides is called a __________ triangle.
The tool used to draw a circle is a __________.
A rhombus has __________ equal sides.
A parallelogram has opposite sides that are __________.
The area of a rectangle is found by multiplying its __________ by its width.
A square is a special type of __________.
A triangle with two equal sides is called a __________ triangle.
A right angle measures __________ degrees.
The number of sides in a quadrilateral is __________.
The point where two lines meet to form an angle is called a __________.
The diameter of a circle is __________ the length of its radius.
An obtuse angle is greater than __________ degrees.
A trapezoid has __________ pairs of parallel sides.
A rhombus has __________ opposite angles.
An equilateral triangle has __________ equal sides.
A scalene triangle has __________ equal sides.
A protractor is used to measure __________.
The opposite sides of a parallelogram are always __________.
The sum of the angles in any triangle is always __________ degrees.
A right triangle has __________ angle(s) of 90°.
The angle between two straight lines is called an __________.
A parallelogram has __________ pairs of parallel sides.
The point where a circle intersects its center is called the __________.
A circle’s __________ is the distance from its center to any point on the circle.
A triangle’s __________ is the longest side.
The __________ of a square is the distance from one corner to the opposite corner.
A trapezoid has __________ parallel sides.