Basic Technology JSS 1 Second Term Examination – Week 12

Subject: Basic Technology

Class: JSS 1

Term: Second Term

Week: 12

Duration: 1 Hour 30 Minutes

EXAM INSTRUCTIONS FOR TEACHERS AND STUDENTS

For Teachers:

1. Ensure the exam hall is arranged properly before the test.
2. Check that each student has the correct question paper and answer sheet.
3. Move around to monitor students and discourage cheating.
4. Enforce strict silence during the exam.
5. Collect all answer sheets at the end of the exam.
6. Ensure students do not use mobile phones, notes, or any unauthorized materials.

For Students:

1. Read the instructions carefully before starting.
2. Write your name and class clearly on the answer sheet.
3. Do not talk to anyone during the exam.
4. Do not copy from another student or use any material not allowed.
5. Answer all questions to the best of your ability.
6. Submit your answer sheet when the teacher says time is up.
7. Any form of cheating will lead to disqualification.

Basic Technology JSS 1 Second Term Examination

PART A: OBJECTIVE QUESTIONS 

1. A workshop is a place where _______ takes place.
   a) Cooking
   b) Practical work
   c) Dancing
   d) Sleeping

2. The tool used for holding wood firmly on a workbench is a _______.
   a) Spanner
   b) Saw
   c) Vice
   d) Chisel

3. Which of the following is a non-metal?
   a) Iron
   b) Aluminum
   c) Copper
   d) Rubber

4. The safety rule in a workshop is to _______.
   a) Run around
   b) Wear safety goggles
   c) Play with tools
   d) Ignore instructions

5. The best tool for drawing straight lines is a _______.
   a) Compass
   b) Ruler
   c) Protractor
   d) Divider

6. Cement is used in building to _______.
   a) Cook food
   b) Hold bricks together
   c) Cut wood
   d) Write letters

7. The tool used to measure angles is called _______.
   a) Protractor
   b) Try square
   c) Tape measure
   d) Ruler

8. A house is an example of a _______ building.
   a) Commercial
   b) Residential
   c) Industrial
   d) Public

9. Freehand sketching means drawing _______.
   a) With a ruler
   b) Without instruments
   c) Using a computer
   d) With a machine

10. Which of these is NOT a workshop hand tool?
    a) Hammer
    b) Screwdriver
    c) Pencil
    d) Wrench

11. The tool used to draw small and precise circles is called a _______.
    a) T-square
    b) Compass
    c) Set square
    d) Divider

12. Which of these materials is used to make ceramics?
    a) Clay
    b) Rubber
    c) Plastic
    d) Glass

13. What is the best tool for measuring short straight distances?
    a) Tape measure
    b) Ruler
    c) Protractor
    d) Try square

14. The part of a technical drawing where the name, date, and title are written is called _______.
    a) Title block
    b) Border line
    c) Main drawing
    d) Dimension line

15. A material that does not allow electricity to pass through it is called a/an _______.
    a) Conductor
    b) Insulator
    c) Alloy
    d) Semiconductor

16. The instrument used to measure right angles is called _______.
    a) Protractor
    b) Try square
    c) T-square
    d) Set square

17. A workshop should always be kept _______.
    a) Dirty
    b) Neat and organized
    c) Full of broken tools
    d) Crowded

18. The drawing instrument used to transfer measurements is called _______.
    a) Compass
    b) Divider
    c) Protractor
    d) French curve

19. Which of these is NOT a type of building?
    a) Residential building
    b) Industrial building
    c) Electronic building
    d) Commercial building

20. The most common material used for making glass is _______.
    a) Rubber
    b) Sand
    c) Wood
    d) Clay

21. Which of these is a safety rule in the workshop?
    a) Always run around
    b) Wear protective gear
    c) Ignore safety signs
    d) Use any tool carelessly

22. A material that can bend and return to its original shape is called _______.
    a) Plastic
    b) Glass
    c) Rubber
    d) Ceramic

23. The correct tool for cutting wood is a _______.
    a) Hacksaw
    b) Chisel
    c) Saw
    d) Mallet

24. A marking-out tool used to draw circles is a _______.
    a) T-square
    b) Compass
    c) Protractor
    d) Set square

25. Which of these metals is non-ferrous?
    a) Iron
    b) Copper
    c) Steel
    d) Cast iron

26. What do we use to protect our hands in the workshop?
    a) Safety boots
    b) Gloves
    c) Goggles
    d) Helmet

27. What is the purpose of a drawing board?
    a) For writing letters
    b) To support drawing paper
    c) To store tools
    d) To cut wood

28. A ruler is mainly used for _______.
    a) Measuring angles
    b) Cutting materials
    c) Drawing straight lines
    d) Holding objects

29. Which of these is NOT a building material?
    a) Cement
    b) Sand
    c) Glass
    d) Paper

30. Which of these is used to make windows?
    a) Plastic
    b) Metal
    c) Glass
    d) Rubber

Basic Technology JSS 1 Second Term Examination

PART B: THEORY QUESTIONS 

1. What is the meaning of a workshop?
2. Name two safety rules in a workshop.
3. What is the function of a vice?
4. List three drawing instruments.
5. Why is plastic used for making containers?
6. What is lettering in technical drawing?
7. Mention one example of a ferrous metal.
8. Name one non-ferrous metal.
9. What is the use of a marking gauge?
10. State one function of a measuring tool.
11. Name one property of ceramics.
12. What is the full meaning of PPE?
13. Name one example of a commercial building.
14. State one use of glass in buildings.
15. Give an example of a woodwork tool.
16. Why do we use safety goggles in the workshop?
17. What is the main function of cement?
18. List two types of freehand sketching.
19. What is the use of a ruler in drawing?
20. Give two types of metals.
21. Mention one workbench appliance.
22. What is the meaning of a building material?
23. Name two types of workbench fittings.
24. What is the use of a try square?
25. Name one tool used for drawing curves.
26. List two measuring tools.
27. What is a marking-out tool used for?
28. Mention one type of lettering.
29. What is the function of a T-square?
30. What is the difference between a ferrous and non-ferrous metal?

PART C: TRUE OR FALSE QUESTIONS (30 Questions)

1. A workshop is a place where we play games. (False)
2. Freehand sketching requires a ruler. (False)
3. A hammer is used for driving nails into wood. (True)
4. Cement is used for cutting wood. (False)
5. A vice holds materials firmly. (True)
6. Goggles protect the eyes from dust and sparks. (True)
7. Metals can be shaped into different forms. (True)
8. Safety rules should not be followed in a workshop. (False)
9. A mallet is a type of metal tool. (False)
10. A protractor is used for measuring angles. (True)
11. A divider is used to draw circles. (False)
12. Glass is made from melted clay. (False)
13. A compass is used to draw straight lines. (False)
14. A set square can be used to draw vertical and inclined lines. (True)
15. Rubber is a good conductor of electricity. (False)
16. Safety rules help prevent accidents in the workshop. (True)
17. Lettering in technical drawing means writing letters neatly. (True)
18. A workbench is used for storing books. (False)
19. The T-square is used mainly for cutting metal sheets. (False)
20. Wearing goggles protects the eyes from flying particles. (True)
21. Wood is stronger than metal in construction. (False)
22. The try square is used to test right angles. (True)
23. A chisel is used to cut metal. (False)
24. The protractor is used to measure angles. (True)
25. Ceramics can break easily when dropped. (True)
26. The hammer is used to tighten screws. (False)
27. The vice is used to hold materials firmly on a workbench. (True)
28. Safety gloves protect the hands from sharp objects. (True)
29. The drawing board is mainly used for storing tools. (False)
30. A workshop is a place where practical work is done. (True)

PART D: FILL IN THE GAPS QUESTIONS 

1. A _______ is a tool used to measure angles.
2. The best tool for holding wood in place is a _______.
3. _______ is a strong material used for making houses.
4. _______ is the process of writing letters in a technical drawing.
5. A try square is used to check _______ angles.
6. The workshop rule says we should always wear _______ to protect our eyes.
7. The material used to make glass is _______.
8. _______ is used to measure long distances.
9. A _______ is used to temporarily hold two pieces of wood together.
10. The best tool for marking straight lines on wood is _______.
11. A _______ is a building where people live.
12. The _______ helps in drawing parallel lines.
13. _______ is used to hold bricks together in a building.
14. A _______ is used to measure both inside and outside dimensions.
15. A _______ is used to cut metal sheets.
16. _______ is a common type of plastic.
17. A _______ is used to join two pieces of metal together permanently.
18. The main material for making ceramics is _______.
19. _______ is a type of softwood used in woodwork.
20. A _______ is used for drawing straight lines on paper.
21. _______ is a tool used to draw circles.
22. The _______ is used to check if a surface is level.
23. The _______ helps to measure small objects accurately.
24. _______ is an example of a non-ferrous metal.
25. The _______ holds the pencil when drawing circles.
26. _______ is the process of making sketches without instruments.
27. The _______ helps in cutting metals easily.
28. _______ is a type of hand tool used in workshops.
29. The _______ is used to join two pieces of wood permanently.
30. _______ is a structure where people live or work.

Conclusion

• The teacher collects the answer sheets.
• The students are reminded to always prepare well for exams.
• The importance of honesty and hard work is emphasized.

Basic Technology JSS 1 Second Term Revision Questions and Answers