BASIC TECHNOLOGY FIRST TERM EXAMINATION JSS 2
FIRST
  Â
Examination malpractices may lead to a repeat of the subject or suspensions don’t be involved.
SUBJECT: BASIC TECHNOLOGY Â Â Â TIME: 1HR 30MINSÂ CLASS: JSS 2
OBJECTIVE QUESTIONS
- The simple medical treatment given to somebody before the arriver of the medical personnel is calledÂ
- Rescue operation (b) First aid (c) safety guideline (d) safety protection
- Where the materials needed for First aid care are stored is called (A) Cotton board (b) metal box (c) First aid box (d) plastic box
- First aid and can be used to care for the following except (a) accident (b) injury (c) headache (d) blood donationÂ
- ……………………..can be defined as an operation organized to free from danger (a) Rescue operation (b) caring operation (c) First aid operation (d) responsive operation
- The pair of compass is used for drawing (a) vertical and inclined (b) irregular curves (c) horizontal (D) Arcs and circular linesÂ
- In paper making industry …………………………………… is for producing books (a) Iron Ore   (b). Ceramic   (c) Latex   (d) Wood
- …………………………… metal contain iron (a) alloy (b) ceramic (c) ferrous (d) latexÂ
- ………………. Metals are magnetic (a) Nonferrous (b) ferrous (c) latex (d) synthetic
- We have …………………………. Types of plastics (a) five (b) two (c) three (d) fourÂ
- Clay mud and cement is used to produce ………………………… (a) Iron ore (b) latex (c) synthetic (d) ceramicÂ
- A process of enlarging or reducing the size of drawing is known as …………………………… (a) freehand sketching (b) Isometric drawing (c) orthographic drawing (d) scale drawingÂ
- Which of these can be used to draw vertical and inclined lines (a) protractor (b)Â set square (c) divider (d) compassÂ
- ……… are used for transferring measurement (a) compass (b) French curve (c) scale rule (d) divider   Â
- ………………………….. Is used for determining angles at various degrees (a) divider (b) compass (c) protractor (d) mallet
- ……. Is when ceramic and glass easily break (a) brittleness (b) resistant (c) corrosion (d) conductivity
- Hacksaw is used to cut (a) metal (b) plastics (c) ceramic (d) woodÂ
- The bench on which wood worker perform all his operation is called ………………………….. (a) Workbench (b) work table (c) wooden table (d) anvil
- …………………………… has metal head and wooden handle and used to drive nails (a) punch (b) chisel (c) hammer (d) jackplane
- …….. are called deciduous wood (a) softwood (b) hard wood (c) dry wood (d) wetwood
- …………………………… are called coniferous wood (a) wet wood (b) dry wood (c) cheap wood (d) soft woodÂ
- …………………………. Is used to set drawing paper squarely on the drawing board (a) set square (b)T square (c) protractor (d) French curie
- The following are the instruments used for drawing except (a) drawing board (b) protractor (c) square (d) eraserÂ
- ……………………….is drawn at the bottom right hand corner of the drawing paper (a) figures (b) lettering (c) title block (d) objectsÂ
- ………………………..Can be defined as the state of being save and protected from danger in the workshop (a) technology (b) operation (c) devices (d) workshop safety
- ………………………… Can be defined as a room or building in which things are made, repaired and maintained (a) sitting room (b) living house (c) workshop (d) store
- The following are products of technology find at home except (a) radio (b) television (c) CD player (d) maker boardÂ
- Natural resources such as oil, forest are provided by ………. (a) Nature (b) mankind (c) factory (d) humanÂ
- Workshop accident include the following except (a) fracture (b) wound (c) bleeding (d) high blood pressure
- ………………………….care be defined as unpleasant occurrence that occurs unexpectedly and cause injury (a) first aid (b) rescue operation (c) first aider (d) accidentÂ
- Factors responsible for workshop accident include the following except (a) faulty tools (b) tiredness (c) carelessness (d) seriousness      Â
- Preventive maintenance include the following except (a) inspection (b) lubrication (c) adjustment (d) repair
- Ohm is the unit used for measuring (a) resistance (b) voltage (c) current (d) frequency
- Which of the following is not a tool used on site preparation (a) cutlass (b) hoe (c) axe (d) G clampÂ
- Angle that is less than 900 is called (a) reflex (b) above  (c) acute (d) right angle
- All the following are methods of joining metals except (a) welding (b) soldering (c) riveting (d) gluing  Â
- …………is the free flow of electrons in a conductor (a) current (b) latex (c) synthetic (d) ceramic
Fill in the gap (37-40)
- We have ………………………………….. Types of plasticsÂ
- We have …………………………………. Types of woodÂ
- We have…………………………………… Types of metals
- Hard wood can also be called …………………………………. Wood.
Â
THEORY: Answer only three question
Question three (3) is compulsory
Â
1a. Differentiate between first aid and rescue operation
(b) Explain two aspect of rescue operation.Â
(c) Mention five materials that is needed in a first aid boxÂ
2a. explain five uses of wood and five uses of metals.Â
(b) State two properties of hard wood and soft woodÂ
(c) Mention five products of ceramicÂ
- Construct the following angles. (i) Angles 900 and 450 (AB= 50mm) (ii) angle 600, 30 and 150 (AB = 60mm)
- Draw and explain the uses of five workshop hand tools
5a. explain the following electrical featuresÂ
- Current   (ii)   voltage      (iii)   resistance
(b) Draw two drawing instruments and explain the uses.                   Â