CHEMICAL FORMULAE AND EQUATIONS
Subject : Chemistry
Topic :
- Chemical formulae
- Chemical equations
- Empirical and Molecular formulae
- Relative Molecular Mass and Percentage composition by mass of an element.
Class :
SS 1
Term :
1st Term / First Term
Week :
Week 5
Instructional Materials :
- Lagos State Scheme of Work
- Textbooks On Social Studies
- Online Materials
- Picture Charts
Previous Knowledge :
The pupils have been taught
SYMBOLS OF ELEMENTS, VALENCY, OXIDATION NUMBER, IONS AND RADICALS
in their previous lesson
Behavioural Objectives : At the end of the lesson, the pupils should be able to
- Explain
- Explain Chemical formulae
- Define Discuss Chemical equations
- Empirical and Molecular formulae
- Relative Molecular Mass and Percentage composition by mass of an element.
Content
WEEK: 5
FORMULAE AND EQUATIONS
CONTENTS:
- Chemical formulae
- Chemical equations
- Empirical and Molecular formulae
- Relative Molecular Mass and Percentage composition by mass of an element.
PERIOD 1: CHEMICAL FORMULAE
A chemical formula is a way of representing a chemical compound using the symbols of the elements that make up the compound. The formula tells us how many atoms of each element are in the compound. For example, water is made up of two hydrogen atoms and one oxygen atom. Its chemical formula would be H2O.
Chemical formula can also be defined as a collection of two or more symbols to represent one molecule of the compound. For example, the formula of tetraoxosulphate(VI) acid is H2SO4. This formula shows that in a molecule of tetraoxosulphate(VI) acid, there are two atoms of hydrogen, one atom of sulphur and four atoms of oxygen.
The table below contain examples of compounds with their formulae
| Compounds | Formulae |
| Oxygen molecule | O2 |
| Hydrogen molecule | H2 |
| Hydrogen chloride | HCl |
| Potassium chloride | KCl |
| Magnesium
tetraoxosulphate(VI) |
MgSO4 |
| Hydrogen sulphide | H2S |
| Bromine Molecule | Br2 |
| Ozone | O3 |
EVALUATION
- What are chemical formulas?
- How do they represent compounds?
- What information do they provide?
- Give two examples of common chemical formulas
- Mention four importance of knowing chemical formulas
- Write the chemical formulae of the following:
- Sodium oxide, Calcium oxide, aluminium oxide,
- Carbon(IV) oxide, iron(II) oxide, copper(I) oxide
- Sodium tetraoxosulphate(VI), Calcium trioxonitrate(V), magnesium trioxocarbonate(IV).
PERIOD 2:
CHEMICAL EQUATIONS
Chemical reactions are represented in form of equations which show the reactants and products in any given chemical reaction. For example, the reaction of aqueous hydrogen chloride and aqueous sodium hydroxide is represented by the equation:
HCl(aq) + NaOH(aq) NaCl(aq) + H2O(l)
Balancing Chemical Equations
All chemical equations must be balanced in order to comply with the law of conservation of mass. For example, to balance the equation for the reaction involving the combustion of ammonia gas in air, the following steps should be followed:
Step 1: The reactants (LHS) are NH3 and O2, while the products (RHS) are
NO and H2O
NH3(g) + O2(g) NO(g) + H2O(g)
Step 2: Place a 4 in front of NH3 and a 6 in front of H2O. There are now 12 hydrogen atoms on both sides of the equation.
4NH3(g) + O2(g) NO(g) + 6H2O(g)
Step 3: Place a 4 in front of NO to balance with the 4 nitrogen atoms of the LHS of the equation.
4NH3(g) + O2(g) 4NO(g) + 6H2O(g)
Step 4: Place a 5 in front of O2. An “atom count” shows that the equation is
| balanced. | |
| 4NH3(g) + 5O2(g) | 4NO(g) + 6H2O(g) |
An equation must be balanced. A balanced equation contains the same number of atoms of the elements of the compounds on both sides of the equation.
The equation must also show the physical states of the reactants and the products i.e. whether in aqueous solution or gaseous or solid state.
Evaluation
Balance the equations below:
- CaCO3(s) +HCl(aq) CaCl2(s) + H2O(l) + CO2(s)
- CO2(g) + NaOH(aq) Na2CO3(aq) + H2O(l)
PERIOD 3: EMPIRICAL AND MOLECULAR FORMULAE
Empirical formula is the simplest formula which gives the ratio of the number of different atoms present in a compound. It does not give the exact number of each atom whereas the molecular formula gives the exact number of the atoms present in a molecule of a compound.
The molecular formula of a compound is a whole number multiple of its empirical formula.
Examples:
- Find the empirical formula of a compound which contains 80% carbon and 20% hydrogen by mass.
Hence, the empirical formula is CH3
- Find the empirical formula of a compound which on analysis yields the following as the reacting masses carbon= 2.0, hydrogen=0.34g, Oxygen = 2.67g. From your result find the molecular formula of the compound. If it’s relative molecular mass is 60. (C=12, H=1, O=16) Solution:
(CH2O)X= 60
(12 + (2×1) + 16)x =60
(12+2+16)x=60
(30)x= 60
X= 2
Molecular formula is therefore (CH2O)2
=C2H4O2 or CH3COOH
EVALUATION:
Calculate the empirical formula of 15.8% Al, 28.1% S, 56.1%O
PERIOD 4:
RELATIVE MOLECULAR MASS, MOLAR MASS AND PERCENTAGE COMPOSITION
If the formulae of a substance and the relative atomic Masses of each of the elements are known, then it is possible to determine the relative molecular mass of that substance.
Relative molecular mass (Mr) is a measure of the average mass of a molecule. It is calculated relative to the mass of carbon-12, which is taken to be 12 u.
Molar mass (Mr) is a measure of the average mass of a molecule. It is calculated relative to the molar mass of carbon-12, which is taken to be 12g/mol.
Percentage composition is a way of expressing the relative proportions of the elements in a compound. It is calculated by dividing the mass of each element by the total mass of the compound, and then multiplying by 100.
The Mr of a molecule can be calculated from its percentage composition, using the following formula:
Mr = (% element 1) + (% element 2) + …
For example, the Mr of water is 18.015 g/mol. This can be calculated from its percentage composition:
Mr = (2 x 1) + (16 x 1) + (100 x 0.015)
= 2 + 16 + 0.15
= 18.015 g/mol
The relative molecular mass refers to the number of times a mole is heavier than one- twelfth the mass of one atom of carbon -12. It has no unit.
The relative molecular mass of a compound is the sum of the masses of all the atoms present in one molecule of the compound .e.g.
For NaCl, the relative molecular mass= (23 +35.5) = 58.5
For ethanol = C2H5OH (carbon=12, H=1, O =16)
The relative molecular mass of ethanol
= C2H5OH
(12×2) + (1×5) + (16) + (1)
24 + 5 + 16 +1 = 46
THE MOLAR MASS
This is the relative molecular mass expressed in grams. E.g. the molar mass of ethanol is 46gmol-1
In 12g of carbon-12, there are 6 × 1023 atoms of carbon. This is one mole of carbon -12.
A mole of any substance is the amount of that substancewhich contains 6× 1023 particles of that substance e.g. One mole of ethanol has a mass of 46g and contains 6× 1023 ethanol molecules.
NOTE: The relative molecular mass has no units but the molar mass of any substance is expressed in grams.
PERCENTAGE COMPOSITION OF A COMPOUND
To calculate the percentage position of ethanol whose molecular formula is C2H5OH, given that the relative atomic masses of carbon, hydrogen and oxygen are 12, 1, and 16 respectively?
First calculate the molar mass ofC2H5OH =(12×2) +(1×5) + (16)+ (1) = 46gmol-1
Then determine the masses of C H and O present;
Mass of carbon= 12×2=24g
Mass of hydrogen= 6×1 = 6g
Mass of oxygen = 16× 1 = 16g
Molar mass of C2H5OH= 46g
Therefore, percentage of C= × 100 = 52.17%
Percentage of hydrogen= × 100 = 13.04%
Percentage of oxygen= × 100 = 13.04%
(i) Calculation of the chemical formula from percentage composition by mass.
We can determine the simplest chemical formula of a compound, given its percentage composition e.g. If the formula for anhydrous disodium trioxocarbonate (iv) is not known, if its percentage composition by mass
is known then it chemical formula could be calculated.
For example, the percentage composition of the compound was found to be Na=43.40%,C= 11.32% and O = 45.28%. This would mean that in every 100g of the compound, the masses of Na, C and O were 43.40g, 11.32g and 45.28g respectively.
The amount in moles of Na, C and O would be.
, and respectively.
Therefore, the amount in moles of Na = = 1.89.
Amount in mole of C= =0.94.
Amount in mole of O= =2.83.
Molar ratio of H: C: O is 1.89: 0.94: 2.83.
2: 1 : 3
Na: C: O= Na2C O3
The simplest formula is therefore, Na2CO3
GENERAL EVALUATION
ESSAY QUESTION
- Differentiate between valency and oxidation number.
- Determine the empirical formula of an oxide of nitrogen containing 70% oxygen, if the relative molecular mass of the oxide is 92, deduce its molecular formula.
- Balance this chemical equation
NaOH + H2SO4 Na2SO4 + H2O
